Dallas, Texas, USA 
Safe locksmith
Safe Locksmith in Fort Worth, TX
Safe will not open, the combination is gone, the keypad is dead, or you have a new one to install? We work on safes for Fort Worth homes and businesses, gun safes included, and try to open them without drilling when possible.
Request a locksmith
Safe locksmith service
Safe Opening, Repair, and Installation in Fort Worth, TX
Cannot get into your safe, or need one repaired or installed?
Texas Locksmith Pros opens, repairs, and installs safes for Fort Worth homes and businesses. We open locked safes, change combinations, repair or replace safe locks, and install and anchor new safes. If the safe is locked, we try non-destructive opening first and drill only when the lock leaves no other practical way in. Before opening a safe, we ask for proof that you own it or are authorized to access it.
- Open a locked safe, most without drilling
- Reset combinations and repair safe locks
- Install and anchor new and gun safes
Serving Fort Worth
Safe Locksmith Across Fort Worth, TX
We are a mobile safe locksmith across Fort Worth. Tell us the safe brand, if it uses a dial, keypad, or key, and what happens when you try to open it. That helps the technician come prepared for the safe you have. We also provide Fort Worth locksmith service for business and home lockouts, rekeying, and lock changes.
- Downtown Fort Worth
- TCU / West Side
- Stockyards
- Arlington Heights
- Near Southside
- Rivercrest
- Wedgwood
- Alliance / North Fort Worth
Open Monday to Saturday
7 AM to 10 PM
Mobile service at your door, across Fort Worth.
ServiceMobile at your door
Licensed & insured#B29700001
QuoteFree, no obligation
Opening and unlocking
Safe Opening and Unlocking in Fort Worth, TX
Entered the combination and the safe still will not open?
Our safe opening and unlocking in Fort Worth covers home and business safes when the combination is lost, the electronic lock will not respond, or the lock or handle is stuck. We start with methods that do not require drilling whenever the safe and lock allow it. If drilling is necessary, we keep the work limited and repair the opening afterward when possible. We work on home, office, floor, wall, and key-operated safes, and we confirm ownership or authorization before opening one.
Open a Safe Without Drilling
We try non-destructive opening first whenever the lock and safe allow it.
Drilling Only When Needed
If the safe cannot be opened another way, we use drilling only as needed and repair the opening afterward where possible.
Lost Safe Key or Key-Operated Safe
If the key is gone, we can open many key-operated safes and repair, rekey, or replace the lock where the hardware allows.
Proof of Ownership Before We Start
We ask you to show that the safe is yours or that you are authorized to open it before work begins.
Combinations and codes
Safe Combination Reset and Change in Fort Worth, TX
Forgotten the combination, bought a used safe without the code, or need to change it after an employee leaves?
We take on safe combination reset and change in Fort Worth on both mechanical dial safes and electronic safe locks. Businesses often call after a manager or employee leaves. We also change combinations on used or inherited safes when the current code is unknown or needs replacing. If the safe is already locked and the combination is lost, we open it first and then set the new combination or code.
Reset a Lost Combination
If the combination is gone, we open the safe first when needed and set a new one.
Change a Dial or Keypad Code
We reset mechanical combinations and reprogram compatible electronic safe locks.
Change the Code After Staff or Ownership Changes
A new code keeps an old employee, previous owner, or anyone with the former combination from using it.
More Than One User Code
On electronic locks that support it, we can set separate codes for different users.
Gun safes
Gun Safe Locksmith in Fort Worth, TX
Cannot get into your gun safe, or have a new one that needs to be installed and anchored?
As a gun safe locksmith in Fort Worth, Texas Locksmith Pros opens and services gun safes when a combination is lost, a keypad stops responding, or the lock fails. We also install and anchor new gun safes and can replace a worn mechanical or electronic lock with compatible hardware. We work on common brands including Fort Knox, Liberty, Cannon, Winchester, and Browning.
Open a Locked Gun Safe
Lost combination, dead keypad, or failed lock? We find the problem and try non-destructive opening first.
Install and Anchor a New Gun Safe
We position the safe and anchor it to a suitable floor or structure.
Repair or Replace the Lock
We service failed dial and electronic locks and can install compatible keypad or biometric hardware when appropriate.
Brands We Work On
Fort Knox, Liberty, Cannon, Winchester, Browning, and other common gun safe brands.
Serviced on site
Gun safes opened, installed, and anchored across Fort Worth.
Lock repair and upgrade
Safe Lock Repair and Upgrade in Fort Worth, TX
Handle turns but the bolts do not move, or the keypad will not take your code?
For safe lock repair and upgrade in Fort Worth, we check the lock first to find out what has failed. The problem may be a worn mechanical lock, a failed keypad, a loose handle, a bolt that will not move, or an electronic lock that still will not respond after the battery has been changed. We repair the part when it can be saved and replace the lock when it cannot. If you want to change the type of lock, we can install a compatible electronic keypad or biometric lock on safes that support the upgrade.
Dial, Handle, and Bolt Problems
We check sticking dials, loose or free-spinning handles, and bolts that will not retract.
Keypad and Electronic Lock Problems
We check dead keypads, repeated error or beeping problems, and locks that will not accept a known code.
Safe Lock Replacement
When the existing lock has failed beyond repair, we replace it with a new lock that fits the safe.
Electronic and Biometric Upgrades
On safes that support them, we can replace an older lock with a compatible keypad or biometric option.
Installation and anchoring
Safe Installation and Anchoring in Fort Worth, TX
Bought a safe that needs installing, or need an existing one moved and anchored somewhere else?
Our safe installation and anchoring in Fort Worth covers new safes and ones you already own. Before the move or installation, we look at the safe size and weight, the route to the room, and where the safe can be anchored. Depending on the safe and location, anchoring may be into concrete, a slab, or suitable framing. We also work with office, fireproof, high-security, drop, and depository safes for Fort Worth businesses. If the same job includes new commercial door hardware, we can also take care of commercial lock installation.
What installation covers
- Install a safe you have already purchased
- Move an existing safe to another suitable location
- Anchor to concrete, slab, or suitable framing where appropriate
- Plan for the safe weight, doorway clearance, and route into the room
- Home, office, fireproof, high-security, and TL-rated safes
- Drop and depository safes for cash-handling businesses
Request safe service
Get a Safe Opened, Reset, or Installed in Fort Worth
Lost the combination, facing a dead keypad, need a safe lock repaired, or have a new safe to install? Texas Locksmith Pros provides safe opening, combination changes, lock repair, and safe installation across Fort Worth for homes and businesses, including gun safes. Tell us what safe you have and what it is doing, and ask for a free quote.
Licensed and insured · #B29700001 · Monday to Saturday, 7 AM to 10 PM
FAQ
Frequently Asked Questions About Safe Services in Fort Worth
How much does it cost to open a safe in Fort Worth?
The price depends on the safe, the lock, and what is keeping it closed. A small electronic safe with a lock problem is different from a heavy safe that needs more involved opening and repair. Tell us the brand and what happens when you try to open it, and we quote the work before starting.
Can you open a safe if I lost the key?
Yes. We work on key-operated safes as well as dial and electronic safes. Depending on the lock, we may be able to open it and then rekey, repair, or replace the lock so you have a working way into the safe again.
The keypad has new batteries but the safe still will not open. Can you fix it?
Yes. A new battery does not always mean the electronic lock is working. We check the keypad, lock, wiring, and boltwork to find out why the safe is staying locked, then repair or replace the failed part where possible.
Can you install a drop or depository safe for a Fort Worth business?
Yes. We install and anchor drop, depository, office, and other commercial safes. Tell us the model, where you want it placed, and what the floor is, concrete, wood, or tile over slab, so we can plan the anchoring before we arrive.