Dallas, Texas, USA 
Mobile auto locksmith
Car Key Replacement in Fort Worth, TX
Need another car key, or have no working key left? Texas Locksmith Pros comes to your vehicle in Fort Worth to cut and program keys, remotes, and smart fobs for most makes and models.
Request a locksmith
Mobile car key service
Car Key Replacement in Fort Worth, On the Spot
Left with no working key, or a fob that has stopped responding?
We make replacement car keys where the vehicle is parked, whether the last key is gone, the blade is worn out, or the fob has quit working. For most vehicles, car key replacement in Fort Worth is taken care of right there, without taking the car to a dealership.
Before replacing the key, we check where the problem is. A key that will not turn, a remote that will not unlock the doors, and a key that turns but will not start the engine can point to different problems. If the key or fob needs replacing, we make the right one and test it with the vehicle before the job is finished.
- Transponder chip and laser-cut keys
- Remote-head keys and push-to-start smart fobs
- Spare, duplicate, and all-keys-lost replacements
Serving Fort Worth
Mobile Car Key Replacement in Fort Worth, TX
The car can stay where it is. Give us the location along with the year, make, and model, and we bring the key-cutting and programming equipment to you for mobile car key replacement in Fort Worth. We cover the areas pinned below, along with the same neighborhoods served by our Fort Worth locksmith team.
- Downtown Fort Worth
- TCU / West Side
- Stockyards
- Arlington Heights
- Near Southside
- Rivercrest
- Wedgwood
- Alliance / North Fort Worth
Open Monday to Saturday
7 AM to 10 PM
Mobile at your vehicle, across Fort Worth.
ServiceCut and coded on site
Licensed & insured#B29700001
QuoteFree, no obligation
Lost car keys
Lost Car Key Replacement in Fort Worth, TX
Lost all your keys with no spare to fall back on?
You do not need an original key for us to make another one. When every copy is gone, our lost car key replacement in Fort Worth cuts a new key to the vehicle code and programs it at the car. On vehicles that support it, the missing keys can also be removed from memory after the new key is working.
All-Keys-Lost Key Made On Site
No key to copy is needed. We make and program the replacement at the vehicle.
New Key Cut From Vehicle Information
The replacement is cut to the correct code rather than copied from an old, worn blade.
Missing Keys Cleared Where Supported
On compatible vehicles, lost keys or fobs can be removed from memory so they no longer start the car.
Spare and duplicate keys
Spare Car Key Cutting and Programming in Fort Worth, TX
Only have one key, and no backup if it is lost or stops working?
A second key is easier to sort out while the one you use every day still works. Our spare car key cutting in Fort Worth can cut and program that second key at your vehicle, whether you want a backup for yourself or another key for someone who shares the car.
Spare Key Cut and Programmed
Bring the working key and we make a second that is ready to use before we leave.
Second Fob or Smart Key Added
We program another remote or smart fob while keeping your current one working.
Extra Keys for Shared Cars
If two or three people drive the same vehicle, we can make the additional keys you need in one visit.
Transponder keys
Transponder Key Replacement and Programming in Fort Worth, TX
Chip key damaged, or the car no longer recognizes the key you have?
The chip inside a transponder key has to be recognized by the vehicle before the engine will start. If the key is damaged or the car no longer recognizes it, we cut a replacement and program the chip to the vehicle as part of transponder key replacement and programming in Fort Worth. If one transponder key still works, we can add a spare during the same visit.
Damaged Chip Key Replaced
We cut and program a new transponder key when the old one is cracked, worn, or no longer starts the car.
Blade and Chip Done at the Vehicle
The key is cut and the transponder is programmed on site, then checked in the car.
Second Transponder Key Added
Keep the key you already use and have another programmed as a backup.
Key fobs
Key Fob Replacement and Programming in Fort Worth, TX
Fob gone missing, or pressing the buttons and getting nothing from the car?
A dead fob does not always need replacing. We check the battery first, then look at the buttons, casing, and whether the vehicle is still recognizing the remote. If a replacement is needed, we match the fob to the year, make, and model and program it as part of key fob replacement in Fort Worth.
Remote-Entry Fobs
We program replacement or spare remotes for locking and unlocking the vehicle.
Proximity and Smart Fobs
We set up compatible fobs for keyless entry and push-button start.
Fob Battery, Buttons, and Case
Dead batteries and damaged cases can often be dealt with without replacing the whole fob.
Push-to-start
Push-to-Start and Smart Key Replacement in Fort Worth, TX
Lost your push-to-start fob, or only have one smart key left?
Push-to-start vehicles need the correct smart key paired with the car. We bring push-to-start and smart key replacement in Fort Worth to the vehicle and set up the replacement for proximity entry and push-button start. If the last smart key is gone, many vehicles can still be programmed without an existing fob.
Replacement Smart Key Programmed
We pair the new fob with the vehicle and check both entry and starting functions.
Another Smart Key for a Backup
A second compatible fob can be added while your current smart key stays active.
No Smart Key Left
For many all-keys-lost systems, we can program a new fob at the vehicle and remove missing fobs where the system allows.
Cut & coded on site
Smart keys programmed at the vehicle, across Fort Worth.
Broken keys
Broken Car Key Extraction and Replacement in Fort Worth, TX
Snapped your key in the door or ignition, with part of it still stuck inside?
If part of the key is stuck in the door, trunk, or ignition, we remove it without damaging the cylinder. Our broken car key extraction in Fort Worth uses the proper tools to remove the broken piece, then checks whether the key was badly worn or the lock was binding. Once everything is clear, we can cut a fresh key at the vehicle.
Broken Piece Removed Carefully
We extract the key from the door, trunk, or ignition without forcing the lock.
Fresh Key Cut to Code
The new blade is cut from the correct vehicle code instead of copying the wear from the broken key.
Bent or Cracked Keys Replaced Early
If a key is already flexing, cracking, or getting hard to turn, we can replace it before it snaps.
Ignitions
Car Ignition Repair and Replacement in Fort Worth, TX
If the key is hard to turn, sticks in the ignition, or will not come back out, the problem may be in the ignition cylinder rather than the key itself. Our car ignition repair in Fort Worth inspects the key and ignition at the vehicle before deciding what needs to be fixed. A worn cylinder can often be repaired, while one that is seized or badly damaged may need replacement. When possible, the replacement is keyed to the car key you already use.
Common ignition problems
- Key needs wiggling or extra pressure before it turns
- Key sticks in the ignition or is difficult to remove
- Ignition cylinder feels loose when the key turns
- Key turns but the engine does not crank
- Dash or accessory power cuts in and out while turning the key
Request mobile service
Schedule Car Key Replacement in Fort Worth
Tell us the year, make, and model, whether any working key remains, and where the vehicle is parked. We confirm the price before the work starts, then come out with the equipment to cut and program the key or fob your car needs.
Licensed and insured · #B29700001 · Monday to Saturday, 7 AM to 10 PM
FAQ
Frequently Asked Questions About Car Keys in Fort Worth
How much does a replacement car key cost in Fort Worth?
It depends on what the vehicle uses and what is still working. A metal key, chip key, remote-head key, and smart fob do not take the same parts or programming. We also check whether there is a working key to copy or whether the job is all-keys-lost. You get the price before we begin.
Can you make a car key if I have lost the only one?
Yes, for many vehicles. We can make a replacement without an original key to copy, then program it to the car when the key system requires it. Give us the year, make, model, and VIN so we can confirm what your vehicle needs.
I changed the battery in my key fob and it still does not work. What next?
The battery may not be the problem. The fob can have a damaged button, internal fault, or programming issue, and the car may have stopped recognizing it. We can check the remote and tell you whether it can be repaired, reprogrammed, or needs replacement.
Can I have a spare smart key made before I lose the one I have?
Yes. If your current smart key is working, we can program a compatible second fob and keep the original active. Making the spare now also means you are not dealing with an all-keys-lost job later.